| PART |
Description |
Maker |
| 74ALVT162821 AV162821DL 74ALVT162821DGG 74ALVT1628 |
2.5V/3.3V 20-bit bus-interface D-type flip-flop; positive-edge trigger with 30Ω termination resistors(3-State)(30 Ω终端电阻.5V/3.3V 20位总线接口上升沿触D触发器（三态）) 2.5V/3.3V0位总线接口D型触发器，积极与30Ω终端电阻3态）（带30Ω终端电阻.5V/3.3V0位总线接口上升沿触发沿触发触发器（三态）
Dual 2-Line To 4-Line Decoders/Demultiplexers 16-SO -40 to 85
2.5V/3.3V 20-bit bus-interface D-type flip-flop; positive-edge trigger with 30ohm termination resistors 3-State
2.5 V / 3.3 V 20-bit bus-interface D-type flip-flop, positive-edge trigger with 30 Ohm termination resistors (3-State)
|
NXP Semiconductors N.V.
PHILIPS[Philips Semiconductors]
|
| MB2821 |
Dual 10-bit D-type flip-flop;positive-edge trigger (3-State)
|
Philips
|
| 74ABT16374B 74ABT16374BDGG 74ABT16374BDL 74ABTH163 |
16-bit D-type flip-flop; positive-edge trigger 3-State
|
PHILIPS[Philips Semiconductors]
NXP Semiconductors
|
| 74AUP2G80GS |
Low-power dual D-type flip-flop; positive-edge trigger
|
NXP Semiconductors
|
| KK74LV74 KK74LV74D KK74LV74N |
Dual D-type flip-flop with set and reset; positive-edge trigger
|
KODENSHI KOREA CORP.
|
| 74LVC74ABQ-Q100 74LVC74AD-Q100 74LVC74APW-Q100 |
Dual D-type flip-flop with set and reset; positive-edge trigger
|
NXP Semiconductors
|
| 74AUP1G80GW 74AUP1G80GM 74AUP1G80GN |
Low-power D-type flip-flop; positive edge trigger 低功耗D型触发器;上升沿触
Low-power D-type flip-flop; positive edge trigger AUP/ULP/V SERIES, POSITIVE EDGE TRIGGERED D FLIP-FLOP, INVERTED OUTPUT, PDSO6
|
NXP Semiconductors N.V.
|
| ACH16821DL |
20-bit bus-interface D-type flip-flop; positive-edge trigger 3-State
|
PHILIPS[Philips Semiconductors]
|
| 74LVC821A 74LVC821APW |
10-bit D-type flip-flop with 5 V tolerant inputs/outputs; positive-edge trigger; 3-state
|
NXP Semiconductors
|
| 74HC173 74HC173N 74173 74HCT173 74HCT173N 74HC173D |
74HC/HCT173; Quad D-type flip-flop; positive-edge trigger; 3-state
Quad D-type flip-flop positive-edge trigger 3-state
|
NXP Semiconductors
PHILIPS[Philips Semiconductors]
|
